With this digital caliper made of lightweight carbon fiber you ensure a very accurate measurement to within 0.1 mm. This digital version allows you to easily read your measurement via the LCD Display, in both mm and inch.
Accurate measurement to within 0.1 mm
This digital caliper makes it possible to easily read the measurement via the LCD Display, both in mm and inch. It is suitable for measuring inner and outer dimensions and depth measurements up to 150 mm. This caliper has a zero setting function in every position so that you can always immediately start a new measurement.
Four ways to measure
With greater precision than a folding rule or tape measure, the Optimus caliper allows you to measure in four different ways: inner dimensions, outer dimensions, depth measurements and step measurement. Use the measuring jaws for the inside and outside measurements and the measuring pin that slides out of the ruler for depth measurements. This digital caliper has a measuring accuracy of 0.1 mm.
Reading a regular caliper takes practice, with the digital version this is a piece of cake. Because the measured sizes are displayed digitally, you can read the lengths accurately to 0.1 mm.
Before taking a measurement, you must first 'zero' the caliper by sliding it completely closed and pressing the zero button, after which you can measure the shape and then your measurement can be read digitally in inches or millimeters. The 'zero' is also possible in any position, this is useful for more complex measurements.