Wood edgers with end guide 12.7x76 mm shank 8 mm
€20.75
This end mill with end guide with cover in tungsten carbonide can be used for precision work on laminates or for fast profile work.
These cutters are ideal for realizing continuous machining on wood.
Use a spout cutter ø 12.7 mm with a cutting length that is slightly more than the thickness of the frame, while with the guide bearing you follow the route of the channel that you have followed from the opposite side of the wood.
These cutters are ideal for realizing continuous machining on wood.
Use a spout cutter ø 12.7 mm with a cutting length that is slightly more than the thickness of the frame, while with the guide bearing you follow the route of the channel that you have followed from the opposite side of the wood.
100% secure iDEAL payment
FREE shipping to the Netherlands
14 day return policy
| Cutter height (I) | Cutter diameter (D) | Total length (L) | Shank (S) |
| 40 mm | 12.7 mm | 82 mm | 8 mm |
| 50,8 mm | 12.7 mm | 97 mm | 8 mm |
| 63 mm | 12.7 mm | 110 mm | 8 mm |
| 76 mm | 12.7 mm | 123 mm | 8 mm |
Specific References
- EAN
- 7442955347398
1HFR0004
Specific References
You might also like
This end mill with end guide with cover in tungsten carbonide can be used for precision work on laminates or for fast profile work.
These cutters are ideal for realizing continuous machining on wood.
Use a spout cutter ø 12.7 mm with a cutting length that is slightly more than the thickness of the frame, while with the guide bearing you follow the route of the channel that you have followed from the opposite side of the wood.
These cutters are ideal for realizing continuous machining on wood.
Use a spout cutter ø 12.7 mm with a cutting length that is slightly more than the thickness of the frame, while with the guide bearing you follow the route of the channel that you have followed from the opposite side of the wood.
